Further Reading on Contact Glow Discharge Electrolysis

If you want to learn more about Non-Faradaic electrolysis, please see the following. Note that these papers deal with Glow Discharges at the Anode (+), whereas we're doing it at the Cathode (-).

Contact Glow-Discharge Electrolysis
BY A. HICKLING AND M. D. INGRAM
Donnan Laboratories, Liverpool University
Received 4th November, 1963 Published in: Trans. Faraday Soc., Vol. 60 (1964) 783

A Study on the Origin of Nonfaradaic Behavior of Anodic Contact Glow Discharge Electrolysis: The Relationship Between Power Dissipated in Glow Discharges and Nonfaradaic Yields
Susanta K. Sengupta, Rajeshwar Singh, and Ashok K. Srivastava
Department of Chemistry, Faculty of Science, Banaras Hindu University, Varanasi-221 005, India. From: J. Electrochem. Soc., Vol. 145, No.7, July 1998 (c) The Electrochemical Society, Inc.

Contact glow discharge electrolysis: a study of its chemical yields in aqueous inert-type electrolytes
Susanta K Sengupta and Om Prakash Singh
Department of Chemrstry, Faculty of Science, Banaras Hindu University, Varanasl 221005 (Indra)
(Received 26 January 1993, m revised form 27 August 1993) From: Journal of Electroanalytlcal Chemistry, 369 (1994) 113-120

Contact glow discharge electrolysis: a study of its onset and location
Susanta K. Sengupta and Om Prakash Singh
Department of Chemisrry, Faculty of Science, Banaras Hindu University, Varanasi 221005 (India)
(Received 9 May 1990; in revised form 13 September 1990) From: J. Electroanal. Chem., 301 (1991) 189-197


I have uploaded copies of these papers to the "Tech Papers" section of hhoinfo.ning.com

DIA Defense Analysis Report 13 November 2009

Technology Forecast: Worldwide Research on Low-Energy Nuclear Reactions Increasing and Gaining Acceptance

Defense Intelligence Agency
Defense Analysis Report
DIA-08-0911-003

Alternator Re-Wire

To generate the high voltage necessary for Plasma Electrolysis "On-Demand" in a vehicle, it may be necessary to install a second alternator, rewired as depicted in this schematic.

New Power Supply Schematic

This is the benchtop power supply I've almost finished wiring up.

Secretary Chu: Calling All Cold Fusion Inventors—and Other Revolutionaries

By Keith Johnson
May 12, 2009, 12:10 PM ET

If you’ve got a plan to transform America’s energy future, now’s the time to put it on paper.

Starting today, the Department of Energy is accepting proposals for energy R&D projects that “disrupt the status quo. The Nation needs transformational energy-related technologies to overcome the threats posed by climate change and energy security, arising from its reliance on traditional uses of fossil fuels and the dominant use of oil in transportation.”

Read Full Article

Dr. John Dash Studies Cold Fusion at Portland State, Oregon

John Dash, Professor Emeritus of Physics at Portland State University, Portland, Oregon, has been studying Cold Fusion. He has even been teaching local High School students about the subject by working with them as his lab assistants.

EXPERIMENTAL EVIDENCE OF 4HE PRODUCTION IN A COLD FUSION EXPERIMENT

EXPERIMENTAL EVIDENCE OF 4HE PRODUCTION IN A COLD FUSION EXPERIMENT
ANTONELLA DE NINNO, ANTONIO FRATTOLILLO, ANTONIETTA RIZZO

ENEA - Unità Tecnico Scientifica Fusione
Centro Ricerche Frascati, Roma

EMILIO DEL GIUDICE
INFN Sezione Milano
Via Celoria 16, 20133 Milan (Italy)

GIULIANO PREPARATA
University of Milan, INFN Sez. Milano
Via Celoria 16, 20133 Milan, (Italy)


This is the paper published by ENEA researchers, verifying the theory proposed by Giuliano Preparata. As seen in the documentary Report 41 - ENEA Frascati LENR "Cold Fusion"

See also: TEN YEARS OF COLD FUSION: AN EYE-WITNESS ACCOUNT
F. Scaramuzzi1
ENEA - Dipartimento Energia , Divisione Fusione, Centro Ricerche Energia
C.P. 65 – 00044 Frascati, Rome, Italy
Accountability in Research, 2000. 8: p. 77.